# Require a course evaluation before the exam and the certificate (2026)

https://cubite.io/blogs/lms-course-evaluation-before-certificate

**By:** Amir Tadrisi
**Updated:** 2026-11-17

Set up a course where the evaluation comes before the exam and the certificate, in Cubite LMS, Moodle, LearnDash and Open edX.

Short answer (November 16, 2026): in Cubite LMS, at [$290 a month or $2,900 a year](https://cubite.io/pricing), put the course evaluation (a Form block) in its own unit before the exam (a Quiz block). The course menu keeps the exam locked until the learner submits the evaluation, and under the default certificate rule, All content is complete, the certificate is issued once every step is done, the evaluation included.

Disclosure: Cubite makes Cubite LMS and publishes this guide. The Moodle, LearnDash and Open edX steps come from each platform's own documentation, read on November 16, 2026, and are linked in the table below.

Accredited and continuing-education courses often collect a course evaluation from every learner, and a common order is lesson, evaluation, exam, certificate, with each step unlocking the next. This guide shows how to build that order in Cubite LMS, what the learner sees at each lock and where the answers go. For the rest of what such providers need, see the [LMS guide for accredited and CE/CPD training providers](https://cubite.io/blogs/lms-for-continuing-education-providers) and the [compliance training LMS guide](https://cubite.io/blogs/compliance-training-lms).

## How to build the path in Cubite LMS

1. Lay out the units. In the course editor, each H3 heading starts a unit, and H2 headings group units into sections. Put the lesson units first, then one unit for the evaluation, then one for the exam.
2. Add the evaluation. Add a Form block to the evaluation unit. It takes rating, single choice, multiple choice, short text and long text questions; a follow-up question can appear when a learner picks a given answer, and any question can require an answer before the form can be sent. Set Submission mode to One-time if answers should not change once sent, and save the form as a template to reuse it in your other courses.
3. Add the exam. Add a Quiz block to the exam unit and set its pass mark and maximum attempts; it can draw its questions from a question bank and carry a time limit. The exam counts as done once the learner passes it.
4. Set up the certificate. In the course's Certificate tab, choose a design or upload your own PDF under Design, set the statement code prefix under Issuing, and under Earning rules leave Issue certificate when at All content is complete, the default. Of the other choices, Every graded quiz is passed would issue the certificate on the exam alone, and Progress reaches a threshold on a percentage.
5. Decide what makes a lesson count. A lesson unit holds back the next step when it has something to finish: a video set to Require learners to finish this video to continue, a SCORM or xAPI package, or, for a text-only lesson, the course's reading-time setting, which new courses start with on and which shows a countdown and a Mark as complete button. A text lesson with none of these does not lock the next unit, and in a course with other gated steps it does not count toward the certificate.

To make a whole course wait for another, for example a final assessment course that follows the training course, add the training course under the assessment course's Prerequisites with a minimum progress and, if you want, a minimum average grade. Until a learner meets them, the assessment course shows Complete these courses first, with their progress against each minimum, and does not let them enroll.

If one of the steps is work a person marks, an Assignment block holds back the next unit until it is graded at or above its pass mark, and Cubite LMS [emails the marker as soon as it is submitted](https://cubite.io/blogs/lms-assignment-submission-notification).

## What the learner sees at each step

- Locked steps: in the course menu, the units after the current step show a lock, and trying to open one shows the message Complete the earlier steps before opening this one. Finished units show a check mark.
- The evaluation: the form shows its title, your description and the questions. Required questions must be answered before it can be sent; afterwards the learner sees your thank-you message, and a one-time form shows that message in place of the form from then on.
- The exam: sending the evaluation unlocks the exam unit. A learner who misses the pass mark can try again while attempts remain.
- The certificate: when the last step is done, the course completes, the certificate is issued and the learner gets a Course completed email with a button to view it. If you put the evaluation after the exam instead, sending it is the step that completes the course and issues the certificate.

## Where the evaluation answers go

- The course's Form responses tab, which appears once the course has a Form block: a Summary view with each question's rating average and spread, choice counts and written answers, a Responses view with each learner's answers, and a CSV download per form.
- A webhook: each submission sends a form.submitted event with the learner, the course and every answer, so an automation tool such as Zapier or Make can add one spreadsheet row per submission.
- Your own AI assistant: through Cubite's [MCP server](https://cubite.io/mcp), Claude or ChatGPT can call form_responses_list to read each form's summary and every learner's answers. It needs the permission to view form responses, which the sign-in screen marks as sensitive.
- Not anonymous: each response is tied to the learner's account, and the Responses view and the CSV show their name and email.

## How Moodle, LearnDash and Open edX build the same path (read November 16, 2026)

Cubite LMS is one of these options, and Cubite publishes this comparison. Each platform below can build this path; they differ in where the evaluation lives and in what decides the certificate. The other rows come from each platform's own documentation, read on November 16, 2026.

| Platform | The evaluation | Holding the exam until the evaluation is done | The certificate | Source, read November 16, 2026 |
| --- | --- | --- | --- | --- |
| Cubite LMS ($290 a month or $2,900 a year) | A Form block in its own unit | The course menu keeps the next unit locked until the form is sent | Issued when all content is complete (the default rule), so the evaluation is required | Cubite's own product, described in this guide |
| Moodle 5.3 | The Feedback activity, which its docs call "ideal for course or teacher evaluations" | Restrict access on the quiz, with an activity completion condition; activity completion must be enabled for the site and the course | Course completion can require all the activities you pick, such as the feedback and the quiz; certificates come from the Course certificate and Certificate manager plugins | Moodle 5.3 docs: Feedback activity (last edited February 25, 2026), Restrict access settings (June 8, 2026), Course completion settings (November 21, 2022) and Certificates (June 26, 2026) |
| LearnDash | A quiz with Assessment (survey) questions, which its docs call "great for pre-course or end-of-course surveys" | Linear progression, the default, makes learners complete each step in order, and Quiz Prerequisites can require the evaluation quiz before the exam | A course certificate is awarded upon successful completion of a course, or a quiz certificate upon passing a quiz | LearnDash docs: Quiz Questions and Course Progression (both updated July 2, 2026), Quiz Access and Progression (November 6, 2026) and Certificates (November 13, 2026) |
| Open edX | The Survey component, one of the advanced components in Studio | Subsection prerequisites, once course prerequisites are enabled: the exam subsection requires the evaluation subsection, and when the evaluation is not a problem set the docs say to set Minimum Score to 0 and Minimum Completion Percentage above zero. Learners see a lock until they meet it | Issued, once the course team activates certificates, to learners who attain a passing grade or otherwise qualify. An entrance exam is the reverse case: an exam learners must pass before the course materials | Open edX docs: Manage Survey Tool (reviewed March 20, 2025), Manage Subsection Prerequisites (April 8, 2025), Manage Course Certificates (June 26, 2025) and Require an Entrance Exam (November 16, 2025) |

When another platform fits better: if you already run Moodle with completion tracking on, Restrict access and course completion build this path from core settings, with a certificate plugin added. LearnDash builds it with its default linear progression, a survey quiz and a course certificate, and Open edX with subsection prerequisites and certificates that follow the course grade. If your evaluation has to be anonymous, Moodle's Feedback activity has a Record user names setting that chooses whether the names of those who answer are shown ([Moodle docs: Feedback settings](https://docs.moodle.org/503/en/Feedback_settings), last edited May 22, 2025, read November 16, 2026), while a Cubite LMS form keeps each response tied to the learner.

The Moodle, LearnDash and Open edX steps were read in each platform's own documentation on November 16, 2026, and may change.

## Course evaluation before the certificate: common questions

### How do I make learners complete a course evaluation before they get the certificate?

In Cubite LMS, add the evaluation as a Form block in its own unit and keep the certificate rule at All content is complete, the default: the certificate is issued once every step is done, the evaluation included. Cubite LMS costs $290 a month or $2,900 a year, with unlimited courses and learners.

### Can the exam stay locked until the evaluation is submitted?

Yes. Put the exam in the unit after the evaluation: the course menu shows it with a lock, a learner who tries to open it is told to complete the earlier steps first, and sending the evaluation unlocks it.

### Where do I see the course evaluation answers?

In the course's Form responses tab, as a summary per question and as each learner's answers, with a CSV download per form. Each submission also sends a form.submitted webhook with the answers, and Claude or ChatGPT can read them through Cubite's MCP server.

### How do I require a course evaluation in Moodle?

Moodle's docs describe the Feedback activity for course evaluations and Restrict access on an activity such as a quiz, with an activity completion condition; completion tracking must be enabled for the site and the course. Course completion can require all the activities you pick, and certificates come from the Course certificate and Certificate manager plugins (Moodle 5.3 docs, read November 16, 2026).

### How do I require a course evaluation in LearnDash or Open edX?

In LearnDash, put a quiz with Assessment (survey) questions before the exam: linear progression, the default, or the exam's Quiz Prerequisites holds the exam back, and a course certificate is awarded on completion. In Open edX, the exam subsection can require the evaluation subsection through subsection prerequisites, and certificates go to learners who attain a passing grade (each platform's docs, read November 16, 2026).

## Running accredited courses?

Bring your course outline and your evaluation form, and we will walk through the lesson, evaluation, exam and certificate path in Cubite LMS.

[Book a 30-minute call](https://cubite.io/go/book?src=course-evaluation)
